Description

Ceiling / Wall Finishing Plate 0-30 degrees for Twin Wall Insulated Flue Pipe BLACK- 6 inch – 150mm Convesa

Plate comes in 2 parts and is elliptical to allow it to fit around angled flue pipe. Suitable for 0-30 degrees

Hole Diameter 205mm maximum diameter.

HETAS Certified – CE Approved

Colour: Black Finish

Please note that we sell all types of flue pipe and fittings. We also offer a free chimney and flue pipe design and quotation service.. Not sure what you need.. Call 0161 439 1400.  Ceiling or Wall Finishing Plate 0-30 degrees BLACK

Plate comes in 2 parts and is elliptical to allow it to fit around angled flue pipe. Suitable for 30 – 45 degrees

APPLICATION
For use on the underside of any pitched ceiling or on a wall where the flue is passing at 0-30 degrees. The plate is elliptical.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 128kgper cubic metre. All parts are fully welded.

Distance to combustibles is 60mm.

APPROVALS
KC is HETAS Approved and is CE marked.

Designation Number 
EN1856-1 T600 N1 D V2 L50040 G60.

INSTALLATION
KC Twin Wall Insulated Chimney parts are secured together by using a Locking Band.

Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

MAINTENANCE
You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.

You can achieve this by installing a black pipe with an access door.
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.