Description

TESY

Air-to Water Air Source Heat Pump – AquaThermica with Heat Exchanger for Domestic Hot Water and connection to Underfloor Heating / Central Heating / Alternative Heat Source

The TESY AquaThermica is an all in one air-to-water, air source heat pump for generating hot water for domestic hot water and central heating. The TESY AquaThermica has a capacity of 200 litres of water and offers a maximum water temperature of 65 degrees. It has an internal sealed coil heat exchanger to allow a closed (unvented) connection to a central heating / under floor heating circuit. The appliance has an efficiency rating of A+ making it one of the most efficient water heaters in its class. It is powered by a single phase 230v power supply that is wired via a fused spur. The heat pump requires connection of 160mm diameter intake and exhaust air hoses, that connect to the top of the appliance.

The AquaThermica offers a state-of-the-art, compact solution to creating energy efficient hot water for domestic and central heating hot water. It is an environmentally friendly product, operating with renewable energy sources resulting in lower CO2 emissions. The appliance is highly efficient with a precisely balanced refrigerant cycle due to an electronically commutated motor and an electronic expansion valve resulting in 75% lower electricity consumption when compared to similar sized electric hot water cylinders.

Th appliance includes a user friendly programmable LCD touch control screen and a built in diagnostics control system.

It can operate in conjunction with other heat sources, such a conventional boiler or with other renewable energy sources, such as Solar PV Panels.
Exhaust and Intake Hoses Not Included – 160mm diameter. 

  • Floor-standing “air-water” heat pump for domestic hot water production.
  • The AquaThermica Pro range includes models with a volume of 200 and 260 liters with and without a heat exchanger
  • Greater energy efficiency and performance are guaranteed by environmentally friendly refrigerant R290 / propane/ 
  • Electric heating element for faster heating and reaching a high temperature of 75°C.
  • Automatic “Anti Legionella” function and self-diagnosis system
  • Floor standing models
  • Energy class A+
  • Reduced CO2 emissions
  • Electronically regulated expansion valve with stepper motor
  • Temperature range of the incoming air from -7°С to +43°С
  • Up to 75% reduced electricity consumption
  • Lateral 45° air ducts for installation in rooms as low as 2 meters
  • Quiet operation: just 34 dB(A) at 1 meter
  • DRY CHECK Check the magnesium anode without draining the water.
  • Electronic Expansion Valve (EEV) for precision refrigerant control
  • Microchannel condenser and dual temperature sensors for performance and efficiency
  • Easy-to-use electronic panel
  • Up to 65°C DHW temperature with operation of only the heat pump unit
  • Connection to solar and photovoltaic panels
  • Easy-to-use electronic panel

Capacity 194 L
Range 194
Height 1720 m
Energy class A+
Maximum
operational temperature		 75 °C
Maximum working pressure 8 bar
Diameter 630 mm
Heating time 7:11 h:min
Declared load profile L
Electric heating element power 1.5 kW
Min. ÷ max temperature heat pump air intake (90% R.H.) -7 ÷ 43 °C
Frequency 50 Hz
Annual electricity consumption in kWh under average climate conditions 679 kWh
Power supply 1/N/220-240 V
Compressor Rotary
Min. ÷ max temperature installation site -4 ÷ 40 °C
Compressor protection Thermal circuit breaker with automatic reset
Maximum current in HP 2.5 + 6.5 (e-heater) = 9 A
Required overload protections 16A T fuse/ 16 A automatic switch characteristic C (to be expected during installation on power supply systems)
Fan Centrifugal
HP Maximum settable temperature 65 °C
Internal protection Single safety thermostat with manual reset on a resistive element
Nominal air capacity 360 m³/h
Motor protection Internal thermal circuit breaker with automatic reset
Condenser Wrapped externally not in contact with water
Transport weight 110.8 kg
Automatic anti-Legionnella disinfection cycle YES
Minimum height of the premise 1785 mm
Defrosting Active with 4-way valve
CoP (DHW) 3.6
Degree of Protection IPX4
Refrigerant R290
Refrigerant charge 150 g

Additional Information

Installation: Must be installed by a qualified professional.

FREE Delivery: Available on orders over £100. Available to most areas of the UK. Some areas may incur a small delivery charge. Please click here to check delivery to your area.

Explore our full range of products for more options that suit your home.

Need Assistance? Contact us for expert advice on 0161 439 1400.