Air-to Water Air Source Heat Pump – AquaThermica for Domestic Hot Water
with Heat Exchanger To Allow Connection To An Additional Heat Source or to a Small Underfloor Heating Circuit
Air-to Water Air Source Heat Pump – AquaThermica with Heat Exchanger for Domestic Hot Water and connection to Underfloor Heating / Central Heating / Alternative Heat Source
The TESY AquaThermica is an all in one air-to-water, air source heat pump for generating hot water for domestic hot water and central heating. The TESY AquaThermica has a capacity of 251 litres of water and offers a maximum water temperature of 65 degrees. It has an internal sealed coil heat exchanger to allow a closed (unvented) connection to a central heating / under floor heating circuit. The appliance has an efficiency rating of A+ making it one of the most efficient water heaters in its class. It is powered by a single phase 230v power supply that is wired via a fused spur. The heat pump requires connection of 160mm diameter intake and exhaust air hoses, that connect to the top of the appliance.
The AquaThermica offers a state-of-the-art, compact solution to creating energy efficient hot water for domestic and central heating hot water. It is an environmentally friendly product, operating with renewable energy sources resulting in lower CO2 emissions. The appliance is highly efficient with a precisely balanced refrigerant cycle due to an electronically commutated motor and an electronic expansion valve resulting in 75% lower electricity consumption when compared to similar sized electric hot water cylinders.
Th appliance includes a user friendly programmable LCD touch control screen and a built in diagnostics control system.
It can operate in conjunction with other heat sources, such a conventional boiler or with other renewable energy sources, such as Solar PV Panels. Exhaust and Intake Hoses Not Included – 160mm diameter.
Floor-standing “air-water” heat pump for domestic hot water production.
The AquaThermica Pro range includes models with a volume of 200 and 260 liters with and without a heat exchanger
Greater energy efficiency and performance are guaranteed by environmentally friendly refrigerant R290 / propane/
Electric heating element for faster heating and reaching a high temperature of 75°C.
Automatic “Anti Legionella” function and self-diagnosis system
Floor standing models
Energy class A+
Reduced CO2 emissions
Electronically regulated expansion valve with stepper motor
Temperature range of the incoming air from -7°С to +43°С
Up to 75% reduced electricity consumption
Lateral 45° air ducts for installation in rooms as low as 2 meters
Quiet operation: just 34 dB(A) at 1 meter
DRY CHECK Check the magnesium anode without draining the water.
Electronic Expansion Valve (EEV) for precision refrigerant control
Microchannel condenser and dual temperature sensors for performance and efficiency
Easy-to-use electronic panel
Up to 65°C DHW temperature with operation of only the heat pump unit
Connection to solar and photovoltaic panels
Easy-to-use electronic panel
Capacity
251 L
Range
251
Height
1911 m
Energy class
A+
Maximum operational temperature
75 °C
Maximum working pressure
8 bar
Diameter
630 mm
Heating time
9:37 h:min
Declared load profile
XL
Electric heating element power
1.5 kW
HP maximum absorption
0.47 + 1.5 (e-heater) = 1.970 kW
Min. ÷ max temperature heat pump air intake (90% R.H.)
-7 ÷ 43 °C
Frequency
50 Hz
Annual electricity consumption in kWh under average climate conditions
1160 kWh
Power supply
1/N/220-240 V
Compressor
Rotary
Min. ÷ max temperature installation site
-4 ÷ 40 °C
Compressor protection
Thermal circuit breaker with automatic reset
Maximum current in HP
2.5 + 6.5 (e-heater) = 9 A
Required overload protections
16A T fuse/ 16 A automatic switch characteristic C (to be expected during installation on power supply systems)
Fan
Centrifugal
HP Maximum settable temperature
65 °C
Internal protection
Single safety thermostat with manual reset on a resistive element
Nominal air capacity
360 m³/h
Motor protection
Internal thermal circuit breaker with automatic reset
Condenser
Wrapped externally not in contact with water
Transport weight
127.3 kg
Automatic anti-Legionnella disinfection cycle
YES
Minimum height of the premise
2000 mm
Cathodic protection
Mg anode Ø 33 x 400 mm
Defrosting
Active with 4-way valve
CoP (DHW)
3.8
Degree of Protection
IPX4
Refrigerant
R290
Refrigerant charge
150 g
Additional Information Installation: Must be installed by a qualified professional.
FREE Delivery: Some areas may incur a small delivery charge. Please click the delivery tab to check delivery to your area or call before ordering.
Need Assistance? Contact us for expert advice on 0161 439 1400.
NB. This item is a large item, delivery time is within 7-10 days depending on your location. Please call for further details.
This item must be installed by a qualified installer.
2 Years Parts Warranty.
FREE Delivery to UK mainland only, if you require delivery outside mainland UK please contact us to discess before you Buy Now. (01614391400)
Additional information
Weight
100 kg
Delivery within the United Kingdom
Delivery Is FREE to most parts of England, Wales & Areas of Scotland for all orders over £150. (products under £150 will be charged £9.50 for delivery). Deliveries are carried out by one of the largest and most reputable couriers in the UK. They will deliver your stove on a pallet to your front door / driveway, however due to insurance restrictions it is unlikely that the delivery driver will be able to bring the appliance in to your property. Please allow 2 – 5 working days for delivery from date of dispatch, unless otherwise stated. If you will require further assistance at the time of delivery, or if access to your property is restricted or difficult, or if you have any specific requirements then please speak to us, we have a variety of flexible delivery options and we are always on hand to advise and help.
Please note stoves are heavy and will be delivered to your driveway / pathway on a pallet.
Unfortunately some areas attract a premium from our delivery company and for this reason we have to charge a small excess for some areas. Please check your postcode/region in the list below.
Please note that our website will try to automatically charge you the correct delivery amount based on your postcode, but if this is not correct, please contact one of our members of staff who will be happy to quote you the correct delivery charge.
Postcodes: CA, DG, EH, EX, FK, G, KY, KA, LA, LD, LL35+, ML, PA1-19, PH1-16, PL, SA, SY, TA, TD, TQ, TR and All London Codes are required to pay: £29.00
Customers living in the following postcodes: Any AB postcode area, IV, KA 27-28, KW, DD, PA 20-78, PH 17- 26, PH30-38, are required to pay: £49.00
Isle of Man: £59.00
Isle of Wight: £59.00
Northern Ireland: £49.00
Channel Islands: £49.00
Scilly Isles: £49.00
Republic of Ireland: £49.00
Please note that Outer Hebredes and Shetlands (postcodes HS & ZE), are also subject to a delivery surcharge, please call 0161 439 1400 for a quotation.
If your delivery address is outside the areas listed please contact us for further details regarding the delivery price and schedule. We will always aim to make the delivery charge as low as possible.
Delivery Abroad – Europe
We sell many of our products to customers outside the United Kingdom, in particular Eire and France, however we can ship to any country in or outside Europe. Typically delivery to France costs approximately £200 for a pallet. In order to provide an accurate quotation all we require is your exact delivery address and we can normally provide a fixed quotation within 24 hours. Delivery within Europe typically takes between 5 and 10 days.
, please spend more than £50
