Description
Solid Fire Stop Plate Twin Flue
A Firestop plate is used to allow the chimney to pass between floors, for example, when you need the chimney to go through the ceiling on the ground floor through to the first floor. The steel plate is designed to provide the appropriate distance between the flue and the adjacent flammable materials, according to both fire and building regulations. A plate must be used top and bottom of the floor penetration. A Non-Ventilated Firestop plate can only be used on installations burning gas or oil. T200 For T600 Solid fuel installations ventilated plates must be used. All TwPro fire stops are set at a 60mm to combustible distance.
High-quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances.
Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty
APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick.
Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3.
All parts are fully welded.
Distance to combustibles is 50mm
APPROVALS
TWPro is HETAS Approved and is UKCA marked.
Designation Number
TWPro EN1856-1 T600 N1 W V2 L50040 G50.
TWPro EN1856-1 T200 W V2 L50040 O20.
MANUFACTURER WARRANTY
25 Year Conditional Warranty on product
2 years on paint finish
INSTALLATION
TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.
Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).
Reviews
There are no reviews yet.